Mechanical interface
Provide the actual neck drawing and closure method. A nominal diameter alone does not establish the correct pump, gasket or collar combination.
Component category
Match the sprayer, collar and bottle neck as one assembly
A sprayer choice has both a mechanical interface and a dispensing task. Use this catalogue to identify the desired reference, then confirm the neck geometry, fixing method, collar position and intended fill before approving an assembled sample.
Opens WhatsApp with this page and project direction included. Add the selected SKU or reference, destination market, estimated quantity, logo or decoration direction, component needs and any box requirement before sending. Ask KAIRUINI to confirm availability, compatibility and commercial terms for the defined scope.
Complete photographed catalog41 supplied references
Grouped configurations18 families with color variants together
Specification controlUnknown necks and availability notes clearly marked
Buyer decisions
Define the project before comparing quotations.
Dispensing requirements
Describe the fill product, intended spray behaviour and filling process. Request the appropriate pump and dip-tube specification, and agree performance checks rather than assuming them from the catalogue image.
Complete upper assembly
Review the collar position and cap clearance after the pump is installed. A sample should demonstrate the proposed parts together, with the approved references documented for quotation.
Photographed component references
Compare sprayer, collar and neck-finish directions
These are exact copies of KAIRUINI's supplied English-labeled PNG references. They show visible component directions for RFQ preparation; a photograph does not by itself confirm universal fit, live stock or final compatibility with an unspecified bottle.
41 supplied photographs
Complete sprayer and pump catalog
Browse every supplied reference, with photographed colors and finishes grouped by component configuration and uncertain neck or availability details clearly marked.
Browse all 41 sprayer and pump references →13FEA
Silver plastic sprayer direction
Use the 13FEA neck specification and exact bottle reference when asking KAIRUINI to review this visible component direction.
Compare 13FEA sprayers →
13FEA
Silver anodized aluminum direction
The anodized appearance is a finish and construction direction; final material, fit and appearance remain subject to the selected scope.
Compare 13FEA sprayers →
15FEA
Silver plastic sprayer direction
Reference this image together with the bottle's 15FEA neck information rather than assuming interchangeability with 13FEA.
Compare 15FEA sprayers →
Wide collar
Silver sprayer and wide collar
A wider collar changes the visible transition into the cap and should be checked on the intended bottle assembly.
15FEA wide collar
Gold sprayer and wide collar
Use this gold direction as a visual reference and confirm the applicable finish, collar and bottle match during project review.
Compare 15FEA wide collars →15FEA wide collar
All-black sprayer and collar
The all-black direction should be coordinated with the cap, bottle decoration and approved component sample.
Compare 15FEA wide collars →
13mm screw neck
Silver screw-neck direction
This is a screw-neck component route, distinct from the photographed 13FEA and 15FEA crimp directions.
Compare 13mm screw-neck sprayers →
13mm screw neck
Gold screw-neck direction
Confirm the exact screw-neck specification, bottle, dip tube and cap requirements before selection.
Compare 13mm screw-neck sprayers →
13mm screw neck
Black screw-neck direction
Use the black reference to define appearance while keeping fit and component availability subject to review.
Compare 13mm screw-neck sprayers →
18mm screw neck
Silver 18mm screw-neck direction
The photographed 18mm direction is kept separate from 13mm and FEA references; confirm the exact thread and bottle specification.
Compare 18mm screw-neck sprayers →
15FEA finish direction
Matte silver sprayer appearance
Compare matte silver with the other photographed finish directions, then approve the selected component on the intended bottle.
Compare 15FEA sprayers →
Specification to confirm
Black sprayer — neck type not shown
The photograph shows a black sprayer assembly but does not identify the neck route. Send the bottle neck drawing or exact SKU before matching.
Specification to confirm
Black wide-collar set — neck type not shown
The source identifies a black sprayer and wide collar but does not state the neck size. Treat it as a visual direction pending component confirmation.
Specification to confirm
Silver anodized wide-collar set — neck type not shown
The photographed finish and wide collar are visible, while the neck route remains unspecified and must be confirmed against the bottle.
Related pump reference
18FEA lotion pump — not a perfume sprayer
The source image explicitly labels an 18FEA lotion pump. It is displayed separately so buyers do not mistake it for a perfume atomizer; fit and application require confirmation.
Product starting points
Use an exact reference in your enquiry.
KRN-0149 · 15ml
15ml Smoked Gray Wide Rectangular Black-Cap Perfume Bottle
View product
KRN-0150 · 15ml
15ml Tall Red Ball-Cap Cylinder Perfume Bottle
View product
KRN-0151 · 15ml
15ml Compact Glass Perfume Bottle
View product
KRN-0301 · 30ml
30ml Clear Cylinder Perfume Bottle
View productExplore related bottles
Continue the sprayer and cap assembly review
Browse all 41 supplied sprayer and pump referencesSee complete bottle references with exposed sprayer directionsReview neck and sprayer assemblyComponent matching guidesUse the 15FEA zinc alloy cap matching checklistCompare zinc alloy perfume bottle capsCompare JD-295, JD-308 and DS-281 rhinestone capsPrepare a quotation enquiry
Complete the packaging system
Connect the bottle, closure, decoration and box.
Frequently asked questions
Before you send the RFQ
Are 13FEA and 15FEA perfume sprayers interchangeable?
No universal interchangeability should be assumed. They are separate neck-system directions, and the component set must be reviewed against the exact bottle specification.
What is the difference between plastic, anodized and electroplated sprayer directions?
They describe different construction or finish routes and can produce different visual results. The applicable material, process and final appearance should be confirmed for the selected component and project scope.
Can a wide collar be matched to my perfume bottle and cap?
A wide-collar direction can be reviewed when the bottle neck, sprayer and cap requirements are sufficiently defined. Final fit and proportions should be confirmed on the intended assembly.
What should I include in a sprayer and collar enquiry?
Send the bottle SKU or specification, neck type, sprayer and collar direction, finish or color, quantity, destination and any dip-tube, cap or box requirements.
Does a photographed sprayer confirm stock and compatibility?
No. The photographs provide component references for discussion. Live stock, compatibility, sampling and commercial terms are confirmed for the exact bottle and approved scope.
Start with your requirements
Turn the product direction into a clear packaging enquiry.
Include capacity, quantity, destination, finish, components and target timing.