Procurement introduction & enquiry. Product details remain in English.
Русский — обзор и запрос предложенияFrançais — présentation et demande de devisComponent matching guide
A visible 15FEA label is a useful component reference, but it does not confirm that a decorative zinc alloy cap will fit every perfume bottle that uses the same neck wording. Use this guide to shortlist the photographed DS-180, DS-225, DS-198-2, DS-161 and DS-245 cap directions, then review the bottle neck, sprayer, collar, cap insert, assembled height and fitted box as one project. Final physical fit, finish, quantity, availability, MOQ and timing require confirmation for the exact assembly.
Buyer decisions
Start an assembly record with the exact bottle SKU and neck drawing revision or approved sample ID. If the drawing is unavailable, mark the neck specification as pending rather than selecting a pump from the photographed 15FEA label. Shared neck wording does not prove that bottles, pumps and cap inserts are interchangeable.
List the proposed sprayer or pump model, collar model, photographed zinc alloy shell and internal cap insert separately. Mark any unknown model or insert dimension as to confirm. Use an assembled sample to check cap retention, actuator clearance, collar seating and the visible transition; the shell photograph alone cannot approve fit.
Dip-tube length and spray behavior belong to the selected sprayer and bottle configuration. The decorative cap image does not establish those functional requirements, so include the fill product and pump direction in the project brief.
Square, hexagonal, asymmetric and crown-shaped caps create different assembled heights and orientation requirements. Review the selected model with bottle decoration, logo direction and the planned protective insert before approving the retail pack.
Include the exact cap image, bottle SKU or drawing, neck route, sprayer and collar direction, required finish, quantity, destination, box needs and target timing. KAIRUINI can then define the applicable sample and confirmation route without assuming unverified compatibility.
Unsent assembly brief
Use the existing editable assembly brief to record bottle SKU, neck drawing revision, selected or unselected pump, collar and cap insert, and assembled sample status. A photographed neck label, if present, does not confirm physical fit.
Photographed 15FEA cap starting points
These five complete English-labeled PNG references are exact copies of the supplied files. They document model and appearance directions for a compatibility enquiry; they do not represent universal fit or live inventory.
15FEA DS-180
Use the DS-180 photograph when a compact textured hexagonal direction fits the intended bottle and box proportions.
Review DS-180 →
15FEA DS-225
The broad square top should be checked for shoulder balance, orientation and fitted-box clearance on the selected bottle.
Review DS-225 →
15FEA DS-198-2
Keep the radial metal form and photographed green center detail together when requesting this model direction.
Review DS-198-2 →
15FEA DS-161
Confirm the directional surface and curved profile against bottle decoration and the intended front-facing orientation.
Review DS-161 →
15FEA DS-245
The taller rounded crown direction requires an assembled-height and protective-packaging review before approval.
Review DS-245 →Product starting points
KRN-0149 · 15ml
KRN-0150 · 15ml
KRN-0151 · 15ml
KRN-0301 · 30ml
Explore related bottles
Complete the packaging system
Frequently asked questions
No. The visible 15FEA wording is a starting reference. The exact bottle neck, sprayer, collar, cap insert and assembled fit still require confirmation.
Review the bottle, sprayer or pump, collar, cap insert and zinc alloy shell as one physical assembly, then confirm the fitted-box clearance if a retail pack is required.
No. They document the visible cap model and 15FEA label. The internal insert and retention route must be confirmed for the selected assembly.
Use appearance to shortlist a model, then verify physical fit, orientation, assembled height, finish and packaging clearance against the intended bottle.
Send the exact cap image and model, bottle SKU and neck drawing revision or sample ID, proposed pump, collar and insert models, unresolved interfaces, quantity and destination. Add fill-product and box requirements for the assembled sample review; leave unknown specifications marked to confirm.
Start with your requirements
Include capacity, quantity, destination, finish, components and target timing.